Universal Remote Control RNC-100 Anleitung zur Fehlerbehebung Seite 40

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 67
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 39
ENGLISH
40
DIGITAL AUDIO RECORDING WITH MD RECORDER
For digital recording, select the desired
digital input as recording signal input.
2
Select a desired input of CD, AUX and
VIDEO 1~VIDEO 6 as a recording source.
1
Start recording on the component
connected to OPTICAL or COAXIAL
DIGITAL OUT.
3
Only when the OPTICAL or COAXIAL DIGITAL OUT of this unit is connected to the OPTICAL DIGITAL IN of the MD recorder
or CD recorder, you can enjoy high-quality sound of digital recording without converting the original signals. Refer to
CONNECTING AUDIO COMPONENTS and CONNECTING DIGITAL INs and OUTs on page 5 and 7 and the operating
instructions of the MD recorder or CD recorder.
However, when the COAXIAL DIGITAL OUT is connected to the component installed in another room for ROOM 2 playback,
the digital signals from the COAXIAL DIGITAL OUT will be used for ROOM 2 playback.
󳂮Notes:
Digital recording is available for the digital audio program sources such as CDs, MDs, some DVDs, etc.
In most DVDs as well as some CDs, etc., digital recording may not be available depending on the signal format.
There are some restrictions on recording digital signals. When making digital recordings, refer to the operating instructions of
your digital recording equipment to know what restrictions are imposed.
or
STANDBY
POWER ON
AUD1
TUNER VID1
CD VID2
T.MON VID3
AUX VID4
PHONO VID5
PAGE1
VIDEO AUDIO
INPUT SELECTOR
Start play on the desired input.
4
• Each time this button is pressed, the corresponding
input is selected as follows:
󳂵 DIGITAL 󳂵 ANALOG
󳂮Note : When the selected digital input is not
connected, “DIGITAL” is flickering,
meaning no recording as well as no sound.
or
STANDBY
POWER ON
AUD2
SLEEP D/A
DIMM S.A/B
ROOM2 SUR.B
T.TON PURE
OSD PARA.
PAGE1
DIGITAL/ANALOG
Start recording on the component
connected to VIDEO 1.
3
Start play on the components connected to
VIDEO 2 and CD respectively.
4
• The audio signal from the CD and the video signal
from the VIDEO 2 will be dubbed and you can
enjoy them on the TV set and from the speakers.
• When the VIDEO 2(/ROOM 2) IN/OUT jacks are
connected to video recording component such as
video deck, etc., in the same manner, recording with
VIDEO 2 can be performed.
(If this is the case, be sure to deactivate the ROOM
2 function.)
Seitenansicht 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 66 67

Kommentare zu diesen Handbüchern

Keine Kommentare