Universal Remote Control MRZ-260 - SPECS SHEET Installationshandbuch PDF herunterladen (Seite 10)

MRZ-260 BASE STATION

Page 7

Front Blaster Overload

A few models of audio/video components can be overloaded by the

Front Blaster. If you are having intermittent or inconsistent results

with a particular component, try repositioning the MRZ-260 and

facing the Front Blaster in a different direction. If this improves the

situation but is impractical, it may be necessary to utilize the self-

adhesive flashers only and follow the steps below to Disable the

Front Blaster. This will limit the number of components your MRZ-

260 can control to four. If you have more than four components

you can purchase an additional MRZ-260.

Enabling/Disabling the Front Blaster - Step by

Step via PC

Open the PC software, then plug the MX-880Z PC programmable

remote control into the PC. Open your saved configuration and fol-

low these steps to turn off the front blaster:

1. Open the RF Control Window

The RF Control window opens after selecting RF Control.

2. Turn on/off the Front Blaster

Click on the cell in the IR LED OUTPUT/IR BLASTER column. A list

box will appear. Select a PORT for your device or choose Blaster 1

to enable the front blaster.

Next, click on Save to apply your change.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Keine Kommentare

Universal Remote Control MRZ-260 - SPECS SHEET Installationshandbuch Seite 10