Universal Remote Control R7 - SPECS SHEET Bedienungsanleitung PDF herunterladen (Seite 13)

IR REMOTE CONTROLLER S3F80KB_AN_REV 0.00 (Preliminary Spec)

Bit 0 or Bit 1 Transmission Module

Bit transmission module is used to transmit bit 0 or bit 1. Timer1's T1DATAH and T1DATAL value have to be

setted before this module is used. SIGNAL_1BIT_PERIOD can be used to set that value. If

SIGNAL_1BIT_PERIOD is setted, Timer1 countes until the match interrupt is generated. This code turn on REM

during high sinal and turn off REM during low signal.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 30 31

Keine Kommentare

Universal Remote Control R7 - SPECS SHEET Bedienungsanleitung Seite 13