Universal Remote Control URC-SR3 Bedienungsanleitung PDF herunterladen (Seite 25)

Page 25

Erasing All Learned Commands from

One Component

This function allows you to erase all the learned

commands from one component. For example, if

you want to erase all learned commands on the TV

component button because you bought a new TV,

the process is very simple.

STEP 1: Press the component button where all the

learned commands are stored and the ENTER

button at the same time for 2 seconds until the

component LED turns on.

IMPORTANT: You have 30 seconds to perform

the next step while you are in programming mode.

If you do not press a button within 30 seconds, the

component LED light will turn off. The remote will

exit the programming mode and you will have to

start over.

STEP 2: Press and hold both the component button

you want to erase and the PAUSE button at the

same time for two seconds, until the component

LED light blinks twice to confirm the erasure.

STEP 3: To exit Erase mode, press and hold both

the component button and the ENTER (ENT) button

at the same time until the component LED light

blinks three times.

ENTER

PAUSE

COMPONENT

BUTTONS

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 43 44

Keine Kommentare

Universal Remote Control URC-SR3 Bedienungsanleitung Seite 25