Universal Remote Control R7 - SPECS SHEET Bedienungsanleitung Seite 27
- Seite / 40
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Data Sheet ADP5585
Rev. C | Page 27 of 40
GPI_EVENT_INTERRUPT_EN_A Register 0x1F
Table 39. GPI_INTERRUPT_EN_A Bit Descriptions
Bit(s) Bit Name Access Description
7 to 6 N/A Reserved.
5 GPI_6_INT_EN Read/write (Reserved except for ADP5585AC_Z-01-R7 options)
0 = GPI_6_INT is disabled.
1 = GPI_6_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1) if
GPI_6_INT is set and the GPI 6 interrupt condition is met.
4 GPI_5_INT_EN Read/write 0 = GPI_5_INT is disabled.
1 = GPI_5_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1) if
GPI_5_INT is set and the GPI 5 interrupt condition is met.
3 GPI_4_INT_EN Read/write 0 = GPI_4_INT is disabled.
1 = GPI_4_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1) if
GPI_4_INT is set and the GPI 4 interrupt condition is met.
2 GPI_3_INT_EN Read/write 0 = GPI_3_INT is disabled.
1 = GPI_3_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1) if
GPI_3_INT is set and the GPI 3 interrupt condition is met.
1 GPI_2_INT_EN Read/write 0 = GPI_2_INT is disabled.
1 = GPI_2_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1) if
GPI_2_INT is set and the GPI 2 interrupt condition is met.
0
GPI_1_INT_EN
Read/write
0 = GPI_1_INT is disabled.
1 = GPI_1_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1) if
GPI_1_INT is set and the GPI 1 interrupt condition is met.
GPI_EVENT_INTERRUPT_EN_B Register 0x20
Table 40. GPI_INTERRUPT_EN_B Bit Descriptions
Bit(s) Bit Name Access Description
7 to 5 N/A Reserved.
4 GPI_11_INT_EN Read/write 0 = GPI_11_INT is disabled.
1 = GPI_11_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1) if
GPI_11_INT is set and the GPI 11 interrupt condition is met.
3 GPI_10_INT_EN Read/write 0 = GPI_10_INT is disabled.
1 = GPI_10_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1) if
GPI_10_INT is set and the GPI 10 interrupt condition is met.
2 GPI_9_INT_EN Read/write 0 = GPI_9_INT is disabled.
1 = GPI_9_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1) if
GPI_9_INT is set and the GPI 9 interrupt condition is met.
1 GPI_8_INT_EN Read/write 0 = GPI_8_INT is disabled.
1 = GPI_8_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1) if
GPI_8_INT is set and the GPI 8 interrupt condition is met.
0 GPI_7_INT_EN Read/write 0 = GPI_7_INT is disabled.
1 = GPI_7_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1) if
GPI_7_INT is set and the GPI 7 interrupt condition is met.
- ADP5585 1
- TABLE OF CONTENTS 2
- SPECIFICATIONS 3
- ABSOLUTE MAXIMUM RATINGS 5
- THEORY OF OPERATION 7
- DEVICE ENABLE 8
- DEVICE OVERVIEW 8
- EVENT FIFO 9
- KEY SCAN CONTROL 9
- ADP5585 Data Sheet 10
- 09841-012 11
- 09841-013 11
- Data Sheet ADP5585 13
- 09841-020 14
- Interrupts 14
- REGISTER INTERFACE 15
- Rev. C 16
- REGISTER MAP 17
- ID Register 0x00 19
- INT_STATUS Register 0x01 19
- Status Register 0x02 19
- FIFO_1 Register 0x03 19
- FIFO_2 Register 0x04 20
- FIFO_3 Register 0x05 20
- FIFO_4 Register 0x06 20
- Rev. C 21
- Rev. C 22
- GPI_STATUS_A Register 0x15 23
- GPI_STATUS_B Register 0x16 23
- RPULL_CONFIG_A Register 0x17 24
- RPULL_CONFIG_B Register 0x18 24
- RPULL_CONFIG_C Register 0x19 25
- RPULL_CONFIG_D Register 0x1A 25
- GPI_EVENT_EN_A Register 0x1D 26
- GPI_EVENT_EN_B Register 0x1E 26
- DEBOUNCE_DIS_A Register 0x21 28
- DEBOUNCE_DIS_B Register 0x22 28
- GPO_DATA_OUT_A Register 0x23 28
- GPO_DATA_OUT_B Register 0x24 29
- GPO_OUT_MODE_A Register 0x25 29
- GPO_OUT_MODE_B Register 0x26 29
- RESET1_EVENT_A Register 0x29 30
- RESET1_EVENT_B Register 0x2A 31
- RESET1_EVENT_C Register 0x2B 31
- RESET2_EVENT_A Register 0x2C 31
- RESET_CFG Register 0x2E 31
- PWM_OFFT_LOW Register 0x2F 32
- PWM_OFFT_HIGH Register 0x30 32
- PWM_ONT_LOW Register 0x31 32
- PWM_ONT_HIGH Register 0x32 32
- PWM_CFG Register 0x33 32
- LOGIC_CFG Register 0x34 33
- LOGIC_FF_CFG Register 0x35 33
- POLL_TIME_CFG Register 0x37 34
- PIN_CONFIG_A Register 0x38 34
- PIN_CONFIG_B Register 0x39 34
- PIN_CONFIG_C Register 0x3A 34
- GENERAL_CFG Register 0x3B 35
- INT_EN Register 0x3C 35
- APPLICATIONS DIAGRAM 36
- OUTLINE DIMENSIONS 37
Verwandte Produkte und Handbücher für Fernbedienungen Universal Remote Control R7 - SPECS SHEET
(30 Seiten)
(72 Seiten)
(35 Seiten)
(319 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.056 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern