Universal Remote Control URC-SR3 Bedienungsanleitung PDF herunterladen (Seite 9)

Page 9

STEP 5: Point the URC-SR3 toward the component

(in this example the TV) and punch in the first 3-digit

code that you wrote down for that specific

component. Use the Number buttons 0–9 on the

remote to punch in the code. The TV LED light will

blink each time a number is pressed.

If the 3-digit code number you just punched in is

the correct number, the component you are trying to

program will turn off. If it did not turn off, enter the

next code number from your list until it does turn off.

STEP 6: Once you’ve entered the code number

and the component has turned off, press the

POWER button on the URC-SR3 remote to turn the

component back on.

Next test the VOLUME and CHANNEL buttons (or

PLAY and STOP buttons for DVD/DVR) to make sure

they all work. For example, perhaps your Sony TV

turned off with code number 147, but the volume

controls did not work properly. In this case, try the

next code number listed for that component. Repeat

Step 5 using the next code number until you find a

perfect match.

STEP 7: Once you’ve entered a correct code you

must save it. Press the component button you just

programmed (in this case TV) one more time to save

the code number. The component LED light will blink

two times to confirm that the code was successfully

stored. Now when you press the TV component

button, all of the buttons will work with your TV.

Program the remaining components by repeating

steps 3 through 7.

IMPORTANT: If you have tried all the set-up codes

in the list and the component still did not turn off after

Step 5, either the Auto-Search Method (page 10) or

the Learning Method (page 12) will help you

program.

NUMBER

PAD

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

Keine Kommentare

Universal Remote Control URC-SR3 Bedienungsanleitung Seite 9