
11
The PPMIT5 IP media console is a man-machine
interface which allows call-paging, messages broadcasting
and DSP matrix parameter control. Its back-lit touch screen
is designed for simple and user-friendly operating. The
3-hardware-keys can be freely assigned within the System
control software. Various operating levels with password
protection make the PPMIT5 Media console a versatile
device that fits well in a commercial shopping center as for
an industrial environment where paging over IP-networking
brings flexibility and easy access.
All paging parameters needed for site operating can be
programmed: zones assigned to the different buttons,
name of zones, group of zones, messages triggering, levels
adjustments and pre-call chime but also for fader control,
button control or event control.
The message and the chime are stored into the PPMIT5 IP
media console.
A total of 168 keys over 12 pages allow zone or group
of zones selections. Each key contains a green colour
changing field indicating that the zone is occupied by a
different process.
The PPMIT5 can also be used to control other third party
devices over IP. An end user screen can be built containing
macros and jump-to commands to emulate a Crestron or
AMX panel.
Unidirectional Condenser Addressable Microphone,
compatible with all system units, PPMWJB-V3xx uses an
RS485 protocol over a single CAT5 cable connection, to
transport both Audio and Power from the PPMWJB-V3xx
to the system units.
The PPMWJB-V3xx comprises of 8 zones / 8 buttons with
sleek condenser gooseneck microphone, and spring metal
protection, providing durability and excellent aesthetics as
well as allowing up to 256 zones expansion via the additional
Keypad easy extension station. The buttons can represent a
single zone or a group of zones and are easily defined via the
GUI of the system units using a simple Matrix selection.
The unit offers “Hold” and “Busy” LED signals in addition to
the zone LED’s, and these allow the easy identification of
selection / Busy signals for the user.
All buttons can be programmed with drag & drop features
from the System unit GUI software and each button can
be programmed for Push To Talk or Latch functionality.The
unidirectional condenser microphone warrants high quality
directive signal pick up from the user and hence less
interference from the surroundings thanks to the cardiod
polar pick-up pattern.
The RS485 communication protocol offers daisy chaining
of up to 984.252 yd on a CAT5 cable, and yet makes
outlets easy to connect via a standard RJ45 connectors.
(The microphone compatibility listing shows the maximum
number of units per System).
Main Features: - 8 paging programmable keys with status
and 1 All call button
/ additional Keypad for
PPMxx.
PPMIT5 Characteristics
• 5” TFT full colour paging console
• 3 LED indicators: Power/General Fault/Evacuation
active
• Ethernet: CAT5 connection
• 3 key-buttons: User definable using ATEÏS Studio GUI
• 168 Touch fields: 14 pages with 12 keys ,
• Console size: (L x W x D) 9.84 x 5.51 x 3.15 in.
• Microphone flex length: 11.02 in.
• Weight: 2.42 lbs.
• Colour: RAL 7016
• Front tilted at 30°
• Material: metal back, PVC top and sides
• Base dimensions (HxWxD): 7.87 x 4.21 x 13.58 in.
• Weight: Approx.1.2 lbs.
• Colour: Ral 7035
• Gooze-neck length with mic.: 11.81 in.
• Cable length: 2,952.76 ft.
• Comes standard with Junctionbox (JB)
and CAT5 cable (4.92 ft.).
• PPM Keypad G2 optional Expansion keypad
for an additional 8 selection zones
PPMWJB-V3xx Characteristics
Junction box
Paging console for, L APG2 and ECS System.
PPMIT5, IP-media console:
• PPMIT5, 168 zones
NON-Security paging console with
ETHERNET link for remote paging
over TCP/IP.
Paging Consoles
PPMIT5 / PPMWJB-V3xx / PM1
Paging console
The PM1 is a preamplified single button desktop paging
console that links on all the products, UAPG2, LAPG2 and
ECS. This deskstop paging console with PTT is meant for
a simple All-Call or fixed designated area calls.
It comes with a robust gooseneck microphone and has
a symmetric line-level raised output. (0 dB).
The unit is 24 VDC powered. Optional PSU available.
Functionality:
- Desktop powered ON: permanent green LED
- Contact Out: activation on call key (PTT)
- Contact In: to light the red LED (line busy indicator)
• Height: 1.77 in.
• Length: 9.84 in. with flex 3.54 in.
• Dimensions: 5.12 x 3.54 in.
• Height: 1.77 in.
• Colour: Ral 7035
• Red / Green Bi-colored LED:
Green: powered - Red: line busy
• Entry contact: toggle the LED in red
PM1 Characteristics
PPM Keypad
Consoles & Accessories
Kommentare zu diesen Handbüchern