
7
UAP System
Expandable Universal Audio Processor
UAPg2
The UAPG2 includes two types of presets:
More than 16 Parameter presets: They enable values of
multiple parameters of the same design, such as levels,
gains, EQ, etc. to be restored either from the PC software,
the remote controllers or the control inputs.
UP to 32 design presets: They enable completely different
designs to be restored. Application examples for this feature
are hotel meeting rooms with removable walls.
The Message player incorporated into the UAPG2 allows
you to play any kind of message to be played. Only one
message per UAPG2 can be run at a time. With the 100
Mbyte memory, the following storage times are available with
WAV format:
- 36 minutes of audio message at 48 kHz, 8 bits
- 18 minutes of audio message at 48 kHz, 16 bits
The scheduler allows planning of events (preset
change, message play, close/open TTL out or change
component’s adjustments). Up to 128 different
schedules can be scheduled. In one schedule you can
define up to 100 events.
The UAPG2 has 16 (0 to 5 VDC) control inputs either
analogue or Logical (TTL). Each control can be associated to
any of the variable audio processing functions of the UAPG2
(input level, output level, equalization, routing, mute, bypass,
preset change…).
Several parameters (Min + Max values, positive or negative
variation, linear, log, anti-log) can be programmed for each
of these controls.
Each UAPG2 features 16 logic inputs to trigger sub presets
or other logic functions in the software. Each UAPG2 is
equipped with 8 logic outputs (common rail contact). Each
of those hardware outputs can be associated to virtually any
software buttons or LEDs the system designer requires. The
logic outputs can be used to enable the UAPG2 to control
external equipment.
The UAPG2 can be controlled from third party equipment
like Vity, AMX or AMX, Creston or Vity roomcontroller via its
RS232 serial port via its RS232 serial port, or IP network.
The UAPG2 can be programmed, controlled and also
monitored via IP network using its RJ45 connector.
Easy chain-connection of UAPG2 peripherals (URC and
PPM WJB-V3), using standard CAT5 cables. Junction box is
included with the PPMWJB-V3.
If more inputs or outputs are required, it is possible to
digitally link up to 12 UAPG2 (maximum distance between
two UAPG2 is 32.81 ft). Through this link, you can share up
to 16 channels at 48 kHz or 5 channels at 96 kHz sampling
rate to the next device.
AUDIO INPUTS
• Audio input impedance: 10 kOhms
(symmetrical, screw terminal).
• Input sensitivity: 0 dB, -12dB, -24 dB,-40 dB, -54 dB
(software selection).
• Max input: +15 dBu.
• Bandwidth: 20 Hz to 20 kHz.
• Phantom power soft config 48 VDC.
AUDIO OUTPUTS
• Audio output impedance: 100 Ohms
(symmetrical, screw terminal).
• Bandwidth 20 Hz to 20 kHz
• Max output +15 dBu.
• Total Harmonic Distortion < 0.03% , +0 dBu,
20~20 kHz, unity gain.
• S/N: (84 dB), unity gain 84 dB, 22 Hz/22 kHz.
• S/N:(116 dB),( 54 dB gain),22 Hz/22 KHz.
SERIAL CONNECTIONS
• RS232 port: for ATEÏS or third party equipment
remote control.
• RS485 port: for Remote Controllers and Paging
Microphones data control.
• RJ45 Ethernet port: for PC control and system set up.
DIGITAL LINK
• One RJ45 TX to send data and audio to next device.
• One RJ45 Rx to receive data and audio
from the previous device.
CONTROL OUTPUTS
• 8 common rail contact outputs. Comment :
Caution ! you cannot choose between NO and NC.
CONTROL INPUTS
• 16 Logical inputs or analogue inputs: 0 to 5 VDC
(software selection).
SIZE AND UNIT
• Metal unit 1 U 19” grey RAL 7016.
• L x W x D: 16.97 x 1.73 x 9.45 in.
POWER SUPPLY/CONSUMPTION
• Power supply: AC: 100 to 240 VAC 50/60 Hz
DC: 21-28 VDC.
• Consumption: 40 VA
10 VA in stand-by mode.
UAPG2 Characteristics
Kommentare zu diesen Handbüchern